Chen Pei Enterprise Co., Ltd.

Showing 11 - 20 of 20, total 2 pages [First] [Previous] [Next] [Last]

ferroxcube ferrite components planar er cores
Specification: Planar ER cores
Detail: The ER core design is derived from the original E core and, like ETD and EC cores, has a round centre pole and outer legs with a radius to accomodate round coil formers. These cores are mainly used for power transformers...

ferroxcube ferrite components ei cores
Specification: EI Cores
Detail: The shape of EI cores, more precisely a core set consisting of an E core and an I core, is magnetically equivalent to an E core set with shorter legs. For typical characteristics, see therefore the E core section.

ferroxcube ferrite components e cores
Specification: E Cores
Detail: The shape of E cores is derived from the classical iron sheet lamination cores. For the original E range in fact the dimensions of the existing lamination range were taken so that already commercially available coil forme...

ferroxcube ferrite components ep/lp cores
Specification: EP/LP cores
Detail: The EP/LP core range was specially designed for wideband transformer applications where low build height is a must. The board area occupied by the assembly is almost a square, allowing high packing densities on the PCB. ...

ferroxcube ferrite components ep cores
Specification: EP Cores
Detail: The EP core range was specially designed for wideband transformer applications. The shape of the assembly is almost cubical, allowing high packing densities on the PCB. The winding except the bottom is completely surroun...

ferroxcube ferrite components eq cores
Specification: EQ Cores
Detail: The EQ core design is derived from the ER and PQ. The range is optimized for use in co***ct AC/DC notebook adapters and DC/DC converters. For instance, the EQ30 has the capability to handle a power range of 50 to 70 W (f...

ferroxcube ferrite components etd cores
Specification: ETD Cores
Detail: The ETD core design is a further development of E cores. They are optimized for use in SMPS transformers with switching frequencies between 50 and 200 kHz. The designation ETD (Economic Transformer Design) implies that t...

ferroxcube ferrite components er cores
Specification: ER Cores
Detail: The ER core design is derived from the original E core and, like ETD and EC cores, has a round centre pole and outer legs with a radius to accomodate round coil formers. These cores are mainly used for power transformers. T...

ferroxcube ferrite components efd cores
Specification: EFD cores
Detail: Economic Flat Design (EFD) power transformer cores offer a signifi cant advance in circuit miniaturization. Their low build height and high throughput power-density make them ideally suited to applications where ***ce is ...

ferroxcube ferrite components epx cores
Specification: EPX cores
Detail: EPX cores were derived from EP cores specially for pulse transformers in ISDN and ADSL applications. In co***rison to EP cores they feature an increased centre pole area and achieve the same AL and THD performance in a sm...


Showing 11 - 20 of 20, total 2 pages [First] [Previous] [Next] [Last]
1 2